Refinishing your hardwood floors is not hard. Unfortunately, most property owners believe they must sand down the entire floor and reseal it to achieve the same look and feel. However, in just one day, most property owners can refresh their floors with a simple sanding and refinishing process. Even better, you don’t need to remove the old finish!
If you’re redecorating your home, you may be interested in refinishing your hardwood floors. While hardwood floors require a high level of care to retain their beauty, they may also need to be refinished every couple of years.
If you’re planning to refinish hardwood floors, you’ll first want to prepare your room. Before tackling this project, consult an expert on Hardwood Flooring Refinishing Morris County. First, remove all the furniture and other items. This will reduce the time you spend moving furniture, rearranging the room, and refinishing the floor. In addition, it will allow you to work on just one flood and save time. After sanding, you’ll want to apply a protective coat to the floor.
To refinish hardwood floors, you will need sanding paper with a 220-grit rating, steel wool, and a vacuum. You will also need a lamb’s-wool applicator. Lamb’s wool should be stored in a plastic bag overnight to prevent dust from collecting. You will also need a pry bar to remove shoe base molding around the room’s perimeter. Place the pry bar between the floor and trim to prevent mold damage.
The first step in refinishing hardwood floors is removing shoe base molding. Then, use a sander to prepare the surface and finish with 100-grit sandpaper. Before applying wood stain, sweep the floor with a broom or dust mop.
When determining the cost of refinishing hardwood floors, remember that a smaller room will require more work than a sizeable other sanding and refinishing equipment is bulky and difficult to move through narrow spaces.
Another factor that will impact the cost of refinishing your hardwood floors is the frequency of use. The higher the traffic, the sooner the color and wear will be noticeable. Also, the cost of refinishing hardwood floors depends on the finish you choose. Some finishes last three to five years, while others last even longer. You should also be aware that a newly refinished hardwood floor will need to be refinished every few years if you have a high-traffic area.
The time frame for refinishing hardwood floors depends on the color and finish chosen. Many companies offer post-installation cleaning. Once the job is completed, the area must be sanded and cleaned. Depending on the stain or finish chosen, the method may last a few days or weeks.
Once the refinishing process is complete, you should stay off your new floor for 48 hours or two. If you are refinishing an older foundation, place warning signs, so guests don’t step on it while the job is underway. This will prevent any future damage to the floor and prevent it from becoming worse. Moreover, you should be sure to choose a stain or sealant that doesn’t contain VOCs.